Monday 27 October 2014

Level 1 Chapter 2, Task 1, Linear Links

Hi Jo
Here are my designs for this task. I loved this task and it was brilliant to use the template for each one - it is much easier than looking at a blank A4 page! Also it enabled me to work quicker and much more freely. Hope I am working along the right lines!!












Level 1, Chapter 1, Task 4 - Health and Safety Notes

Hi Jo
Here is Task 4 Health and Safety notes as requested.


Level 1 Chapter 1 Task 2, Fabric Prep - Rotary Cutting Notes

Hi Jo
Here are my Rotary Cutting Notes for task 2.
The fabric preparation was "interesting". I had to re cut about half of my pages - the calico was cut too small and so was the black material - the felt was spot on both black and white.
Anyway, I got there in the end...could not believe how long it took me! It got much easier second time around.

Tuesday 21 October 2014

Machine Embroidery Level1 task 3



This is my sample grid using the tension increases from 0 -9iA really good exercise to see how all the different threads react and even though the stitch length is 3.2 mm it does approve the problems that can occur when the tension is not right for the thread.
This is the reverse side of the sample tension grid. The metallic ones have puckered the fabric.

My notes on task 3

Notes on task 3 cont


Sorry Joe this ended up upside down! Basically, it was to show you the choice of stitch lengths available.

I will get better at this but do not know how to rotate the pictures... cannot wait to start the next task. Do let me know if this is all somewhere along the right lines.

Saturday 11 October 2014

Machine Embroidery module1

Coffee table hand carved wooden top. See charcoal rubbing.



Coffee table rubbing.

My workspace/ fabrics boxed
 
my sewing machine


My tension stitched samples. The yellow from left to right is after cleaning my machine and fitting a new needle showing the darker cotton , so I adjusted the top tension to improve. Then the red fabric left to right was various size stitches to show I had corrected it. Hope this makes sense.


Correction - dispose of the old needles, I have a small plastic diabetic needles container that I will store my old, used needles in and then I will take it up to my Doctors surgery for them to dispose of.